Primare C33 Instruction Manual download pdf (Page 3)

Introduction

The Pro Series Pair of Pumps combination system

is designed to provide both primary and backup

pumping capabilities. The primary pump will

operate as long as it is receiving AC power. If

the power is interrupted, or more water is

coming into the sump than the AC pump can

handle, the backup sump pump will begin

pumping automatically. The backup system has

unique monitoring features that diagnose a

problem and sound an alarm. A light on the

display panel of the control unit will indicate the

cause of the alarm and the corrective action.

The two systems have been pre-assembled for

easy installation.

To extend the battery run time, two batteries may

be connected to the Pro Series C33 system by

purchasing a second battery and acid pack, as

well as a set of battery jumper cables. Jumper

cables specifically designed for this use are

available from the manufacturer, Glentronics, Inc.

The Pair of Pumps Combination Sump Pump

System includes:

• A 1/3 HP primary pump with a caged dual

float switch, and a blue piggyback controller

that plugs into the wall outlet

• A gray backup pump

• A gray control unit with a battery fluid

sensor, a dual float switch, battery cables,

and an internal 13 amp charger

• A battery cap with a hole to accommodate

the fluid sensor

• A battery box

• A rubber union

• A battery filler bottle for adding distilled

water to the battery

You will also need to supply:

• A Pro Series B-2200 Standby Battery or a Pro

Series B12-90 Maintenance-Free Battery. The

internal construction of some wet cell

batteries may not be compatible with this

system. Glentronics can not guarantee the

compatibility of other brands of batteries.

The use of a Pro Series battery is HIGHLY

recommended.

• DO NOT use an automotive battery with this

system

• DO NOT use a Pro Series 1000 battery with

this system. It will not run the pump as long

as the Pro Series B-2200 battery

• A surge protector (recommended)

• Six (6) quarts of 1.265 specific gravity

battery acid

For some installations you may need

additional items:

• 1-1/2” rigid PVC pipe to connect to the

existing plumbing

• A PVC pipe connector or a rubber union

• PVC pipe cleaner and cement

To connect two batteries you will need:

• Two (2) batteries of similar age and capacity

(so they will have equal power)

• Another battery box (optional)

• Two (2) acid packs to fill the dry batteries

• A set of battery cables with rings on both

ends to connect the two batteries together

(available from Glentronics, Inc.)

System Specifications

Power supply requirements .......115 volts, 60 Hz

AC pump pumping capacity.......3000 GPH @ 10’

............................................ ..50 GPM @ 10’

DC pump pumping capacity ......2400 GPH @ 10’

............................................ ..40 GPM @ 10’

Overall dimensions...................11” W x 23¾” H

Page 2

Rubber

Union

Primary Pump Controller

Backup

Pump

Controller

Primary

Pump

Battery Cables

Fluid Sensor

Battery Cap

Backup Pump

Float Switch

Backup

Pump

Battery Box

Battery

Filler

Bottle

Primary

Pump Float

Switch

1 2 3 4 5 6 7 8 ... 18 19

Comments to this Manuals

No comments

Primare C33 Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Remote controls Primare C33